mirror of
https://github.com/wezm/wezm.net.git
synced 2024-12-19 02:39:54 +00:00
43 lines
1.7 KiB
Markdown
43 lines
1.7 KiB
Markdown
+++
|
|
title = "Automated Chimera Linux Installation With pyinfra"
|
|
date = 2024-11-22T12:59:32+10:00
|
|
|
|
# [extra]
|
|
# updated = 2024-07-26T09:58:10+10:00
|
|
+++
|
|
|
|
|
|
I have written some pyinfra deploys to make installing Chimera Linux quick and easy.
|
|
They allow me to go from a machine booted into the installer to booting itself in
|
|
a minute or two. The deploys are targetted at virtual machines, either running on
|
|
my desktop with KVM, or on a VPS host like Digital Ocean, Vultr, or RackNerd.
|
|
I've also included a way to bootstrap remote access to the machine for Installation
|
|
using `xdotool`.
|
|
|
|
- There are variants for EFI and BIOS based systems.
|
|
- The code is at: ...
|
|
- It's not a completely generic framework; feel free to tweak settings as needed
|
|
- You can just run it again if you want to tweak things, reboot, re-run bootstrap; then re-run pyinfra
|
|
|
|
<!-- more -->
|
|
|
|
My examples will demonstrate using the tooling on a Vultr$ VM but I've also run them
|
|
against VMs running on my Linux desktop with KVM, and machines hosted on RackNerd — they should work in most places.
|
|
|
|
- Assumptions:
|
|
- Linux X11 host
|
|
- If you know how to do xdotool on Wayland let me know.
|
|
- initial setup
|
|
- You've cloned the `chimera-pyinfra` repo and `pwd` is it
|
|
- create venv, activate, install pyinfra
|
|
- Boot from the Chimera Live CD
|
|
- Bootstrap access to the machine with xdotool
|
|
- Note IP and disk path
|
|
- Verify access with pyinfra: `exec uname` or something
|
|
- Run pyinfra against the machine
|
|
- Hit Enter to continue
|
|
- `exec reboot`
|
|
- Done, you should be able to ssh to the machine
|
|
- From here you can do post-installation tasks; install additional packages, etc.
|
|
- You may choose to continue to manage the system with pyinfa, or just use this
|
|
to install, then manage by hand.
|